How to set up the NuMatrix(video wall) in Crystal Titan?
In Crsytal Titan, it supports video wall which called the NuMatrix. In this article we'll guide you how to setup the NuMatrix in Crystal Titan.

1. Please kindly open the NuMatrix Application in the PC
a. Choose the Matrix you want to see.
b. Click "OK".
c. By default it will show black screen. Because you haven’t assign any live view for this Matrix yet.

2. Please use NuClient to login to your management server to do the below setup
1. Add Matrix in Management Server:2
a. Go to the Cofig page and click “Physical” icon.
b. Click “Matrix” and press the “Plus” button to add a new Matrix
c.  Input Name, Description, the PC IP Address(which run the NuMatrix application) and the Port number.
d.  Select how many Monitor in this Matrix g. Click the “Test matrix” button to check Matrix is available or unavailable

e. Go to “Live View” page and select “Matrix Monitor” ----> Click “Connect” button. To connect it.
f. Select the “Monitor” and 
g. Select a “Matrix Profile” for this Matrix
h. Select a “View” for this Matrix

2. After that you are able to see the live view on the NuMatrix

To calculate the hardware requirement of NuMatrix, please use our calculator at:

For your reference, we have the video library at:

Customer Feedback
Please rate this article
Somewhat helpful
Not helpful
Not applicable



Channel Partners

  © Copyright 2021 NUUO Inc. All Rights Reserved.   │Contact UsSite MapPrivacy Statement