How to setup the FTP server for the auto backup?
Description
How to setup the FTP server for the auto backup?
 
Solution
1. Please follow below steps to setup the FTP server first.
The FTP server setup concept is very similar in .NVRmini 2, NVRsolo and Titan NVR.
Here is an example of setup the FTP server in Titan NVR.

Step 1. Please go to RAID & File System and input your FTP address and username /password.


Step 2. Then click the "Test FTP" button to test the FTP server is available or not.


And it will show that the FTP server is connected successfully.
Note: please make sure you have entered the correct username and password.

2. Please setup the autp backup setting as below:

Please go to RAID & File System ---> Auto Backup Management to enable the Auto Backup.
  • And you could setup the Daily Backup Time. As below pic if you set the Daily Backup Time: 8:00 then it will start to so the backup process every eight o'clock.
  • Also, you could choose the period you want to backup. (for example the working hours: 9:00- 18:00)
  • Start Time: The start time of recorded video of the previous date. 
  • End Time: The end time of recorded video of the previous date.
  • Then choose the cameras you want to backup.

 


 
Customer Feedback
 
Please rate this article
Helpful
Somewhat helpful
Not helpful
Not applicable
 
 
 

NuCalculator



eHelpdesk



Channel Partners



  © Copyright 2016 NUUO Inc. All Rights Reserved.     │Contact UsSite MapPrivacy Statement