How to set up record on motion on Titan NVR
Symptom
Titan NVR doesn't record on motion.

Cause
Titan NVR is not like Mainconsole can do the motion detection on recording server. In Titan the motion detection should come from camera itself.
 
Solution 
Please go to your IP camera Web page to enable Motion Detection and set Titan NVR with Event recording as well.
 
Please refer to below example of Axis camera:
1. Login to IP camera web page and click Events Configuration.

2.Set up the Motion Detection Window.
 
3.Return to Titan NVR "Recording & Event" Setting --->choose the camera and enable "Motion from Camera" and click "Save".


4. Set up Recording Schedule: Go to Recording Setting--->Recording Mode---> Record by Schedule--> Save


5. Then go to Recording Schedule--> choose the IP camera and click "configure" to set up the time reign and Recording Mode and Motion on which camera. 




6. After that please click "Save" to save all your configurations.
 
 

 
Customer Feedback
 
Please rate this article
Helpful
Somewhat helpful
Not helpful
Not applicable
 
 
 

NuCalculator



eHelpdesk



Channel Partners



  © Copyright 2016 NUUO Inc. All Rights Reserved.     │Contact UsSite MapPrivacy Statement