How to reset NVRmini2 to factory default?
Description
How to reset NVRmini2 to  factory default setting.
 
Solution 
1. Verify that the system is fully booted.
2. Insert your reset tool into the reset button hole on the back of the device. ( see below Figure)
3. Press and hold the reset button for 14 seconds, release your hands until the buzzer beeps twice and the System Status LED flashes in orange.
4. System will restart and all settings are reset to default.
Image:Minitworeset.png
Note: As you reset, it will take you some time, please be patient until you hear the buzzer beeps twice. 
 
5. If the above instructions doesn't work, please contact us at eHelpdesk.
 

 
Customer Feedback
 
Please rate this article
Helpful
Somewhat helpful
Not helpful
Not applicable
 
 
 

NuCalculator



eHelpdesk



Channel Partners



  © Copyright 2016 NUUO Inc. All Rights Reserved.     │Contact UsSite MapPrivacy Statement